Salwar suit product photography has to show three pieces: kameez, bottom and dupatta. Photograph them together as worn, add the back and the dupatta border as extra photos, and check colours at full size. Label unstitched dress material clearly, because an AI shot shows a stitched look.
Salwar suit product photography in Catalogue Studio
Catalogue Studio is for every garment except sarees. The library has separate categories for Salwar Kameez (28 reference shots), Anarkali Suit, Palazzo Suit, Sharara Suit and Pakistani Suit, plus Co-ord Set and Sharara Set. There is no category named dress material or dupatta. A dupatta goes in as part of the set, and an unstitched dress material goes in as the look it makes up into (see below). Drape Studio does not do suits.
Salwar suit photography: showing three pieces
- Arrange the pieces as worn
Kameez above, bottom below, the dupatta beside or draped across the front. Photograph them together, not stacked in a pile.
- Keep every piece in one frame
If the pieces differ in scale or detail, add a separate frame for each. The set in one frame is the first photo.
- Show the tie that makes it a set
Matching trim, a contrast border or a shared print should be visible. That is what the model needs to keep the three pieces coherent.
- Spend the extra photos well
Photo 2: the back. Photo 3: the dupatta border laid out. Photo 4: a close-up of the neckline work or embroidery.
The dupatta
- A dupatta can be worn many ways, and the model will wear it one of them. Check the result: draped over one shoulder, across the chest or at the neck are all normal, but a heavy bordered dupatta reduced to a plain scarf is a mismatch.
- Photograph the border and the end pieces (pallus, tassels) so they can be seen. These are the details a buyer zooms into.
- A sheer dupatta shows what is under it. Lay it over a plain background in your photo so the fabric weight and edge read clearly.
- If the dupatta is the selling point, give it its own detail photo and look at the result at full size.
Bottoms: salwar, palazzo, sharara
| Bottom | Show in the flat-lay | Check in the result |
|---|---|---|
| Salwar or churidar | Full length, gather at the ankle | Ankle fit and gathers match the real piece |
| Palazzo | Width of the leg and the hem | Flare is as wide as the real palazzo |
| Sharara | The flare and any panel or border | Flare, hem border and length |
| Pant or straight cut | Straight, uncreased, full length | Length against the kameez |
Anarkali, palazzo and sharara suits have their own categories, so pick the one that matches your garment when you tag your upload. The flare of the anarkali and the width of the sharara come from your photo, so show them open.
Embroidery, print and colour
- Neckline and sleeve work: a square-on close-up in daylight. Soft detail input gives soft detail output.
- Kameez and bottom in different colours or prints: the tied pair is what the buyer buys, so check that the colours on the model match the real set.
- Prints on the dupatta: show the whole print repeat once, so the scale is clear.
- Review every shot at full size against the real set for colour, print placement and trim before you publish.
Unstitched dress material
A dress material is sold as fabric lengths, usually a top piece, a bottom piece and a dupatta, for the buyer to stitch. An AI model shot has to show a stitched look to work, and that is where listings go wrong: the buyer sees a finished suit and expects to receive one.
- Photograph the real fabric lengths flat as the set (top, bottom, dupatta). Keep these in the listing as the honest image of what is sent.
- Make the model shot from a stitched sample, or from the set photographed as it would look made up, so the print and border lie as they would on the finished suit.
- Say in the title and the first image or description that the material is unstitched, and what lengths are included.
- Do not let the stitched look suggest a size, fit or cut you are not selling.
Build the batch
A batch is garments × models × styles. Eight suits on one model in four styles is 8 × 1 × 4 = 32 shots. On a Create order, a Standard 2K shot is about ₹10–₹13, so 32 shots come to about ₹320–₹400 across our credit packs, each ready in about 3–4 minutes. Direct generation is about ₹20–₹25 at 1K and ₹40–₹50 at 2K. Use one model and the same styles across a range so the listing reads as a collection.
Honest limits
- Three-piece sets are the hardest ethnic wear to get right. Expect to recreate some shots, and plan time to check each at full size.
- The dupatta may be worn simpler than the real piece. If that matters, say so in the listing or add your own dupatta photo.
- Fine embroidery can soften. Keep your own close-up as the detail image.
- The result shows the garment on the model it uses. It does not show how it fits your buyer.
How do I photograph a salwar suit for AI?
Lay the kameez, bottom and dupatta together, as worn, in one frame. Add up to three more photos of the same garment: the back, the dupatta border and the embroidery.
Does Catalogue Studio have a category for salwar suits?
Yes: Salwar Kameez, with 28 reference shots, plus Anarkali Suit, Palazzo Suit, Sharara Suit and Pakistani Suit.
Can I show unstitched dress material on a model?
It can be shown in a stitched look, but say clearly in the listing that the material is unstitched, and keep a real photo of the fabric lengths. The buyer should know what is sent.
Will the dupatta come out right?
It is the piece most likely to be simplified or worn differently. Check it at full size and give it its own detail photo.
Can Drape Studio do salwar suits?
No. Drape Studio is for sarees and lehengas. Suits go through Catalogue Studio.
